Assistive Technology-Adjustable Tablet Holders

All 3 models, standard, Tall, Tall & Wide, share the following in common:

They include the attachments ('Quick Connect' and 'Tipper') for my Tablet Mounts, or your positioning arm (if it has a 1/4-20 female screw hole).

Click pic for larger image

They adjust in the same manner to accommodate an full range of tablets/devices/cases.
They can be positioned in Landscape or Portrait mode, in almost any angle/position.

My standard ATH (extends from 4" to 7.5", with 3/4" tabs) is for:

iPad 1, 2, & 3 by itself or in a very thin case
My Auggie by itself
Smaller tablets/devices, either by themselves or in a case, including Nook, Xoom, Kindle, Fire, Tab, and more

image of
ipad in adjustable tablet holder

My iPad 2 in the standard model of the ATH.

image of jeff
with kindle in adjustable tablet holder

Here's my Kindle Fire in the ATH standard model.
(Jeff is a local friend that I've helped)

Next, my Tall model (extends from 5.5" to 10", with 1.25" tabs) can hold:

iPad 1, 2, or 3, inside of almost any case (including Otterbox and my ipad Ultimate Case!)
My Auggie or Super-Auggie inside their cases
Larger tablets like the Tab

My iPad Ultimate Case in the Tall ATH

image of
tablet carry case/bumper case on adjustable
tablet holder

My Tall ATH holding my iPad 2 inside my Carry Case/Bumper Combo, in landscape mode.
(all models rotate to portrait also)

iamge of
carry case/bumper case combo with adjustable
tablet holder from side

My well worn (over 1.5 years of use!)Carry Case/Bumper Combo
You can see the clear Bumper Case inside.

iPad Ultimate Case in the Tall ATH

image of
ipad Ultimate Case in Tall Adjustable Tablet
Holder

This is my iPad Ultimate Case mounted in the Tall ATH.

In Portrait mode

image of iPad Ultimate Case in Adjustable
Tablet Holder from rear

From the rear

Remember to click any pic to see it much larger

Otterbox in the Tall ATH

image
of Otterbox Defender 2 in Adjustable Tablet
Holder from side

The popular Otterbox Defender 2 in my Tall ATH.
(Personally, it's a hassle to get my iPad 2 into it, so I didn't bother to ;-) I'm not a fan of this case)

image of Otterbox Defender 2 in Tall
Adjustable Tablet Holder

From the rear
(note that the cover can *stay* on the rear in my ATH!)

From the rear

image of Otterbox Defender 2 in
Adjustable Tablet Holder from side without
cover

Now without the cover
(This case has a stiff plastic cover for the front, which snaps to the rear when the iPad is not in use)

My Auggie & Super-Auggie AAC Devices in the Tall ATH

image of Jeff with Auggie in Adjustable
Tablet Holder

Here is Jeff, a local man I've helped,
with my Auggie in the Tall ATH.

From the side

image of
my Super-Auggie AAC device mounted in
Adjustable Tablet Holder from the rear

And from the rear

And finally, my Tall AND Wide model (same height at Tall model but with tabs that adjust from 1.5"-1.75") holds:

BoardMaker Activity Pad (BAP)
Big Grip iPad case

Very Important: Once in the ATH, you can remove from the Holder, OR you can simply separate the Holder from the Tipper, by pressing on the Quick Connect's lever.

Click here to see how the Quick Connect mates with the Tipper
(Shown with my iPad-specific Tablet Holder; the ATH's mate exactly the same!)

Purchase

Remember, when you order an Arm from my Tablet Mounts page, it comes *with*
your selected Tablet Holder! Purchasing an ATH from this page is for the ATH alone.

H-76-ATH - standard Adjustable Tablet Holder - .....$59 (extends from 4" to 7.5", with 3/4" tabs)	Order
H-76-ATHT - Tall Adjustable Tablet Holder.....$59 (extends from 5.5" to 10", with 1.25" tabs)	Order
H-76-ATHTW - Tall & Wide Adjustable Tablet Holder.....$59 (extends from 5.5" to 10", with 1.5" tabs)	Order